Paint and Cut techniques combined

Import an existing cut design or create your own, paint the areas you want by using the paint fill tools, specify which areas will be cut and then export it to your Cutter. The cutter will paint the areas that need to be painted with the marker/brush you want, and then cut the shape out of the paper with its knife tool. Your beautiful Robot paper craftwork will be ready within minutes.

Convert any vector design to embroidery

Import a Vector design to DRAWings Pro or create one from scratch and convert it to embroidery design with a single click. Get professional embroidery results in no time.

---

Create any text art design and convert it to stitches

Use any Font to create your Text art designs and convert them to embroidery

---

Make shape changes easily

Use shaping tools that are available to change you vector design and re-embroider it. Some of the shaping tools are, Node editing, Resizing, mirroring, Weld, Trim, Intersect, Simplify, Blend, Contour, Envelope and many more

---

Fill the embroidery designs with 9 different stitch types

Use any of Satin, Piping, Step, Appliqué, Cross, Netfill, Stippling, Satin serial and Running stitch types to fill the embroidery designs.

---

Styles and Patterns are included

Use Styles and Patterns to fill the shapes with artistic stitches and create unique embroidery designs.

---

Supports multiple Appliqué

You can place multiple appliqué on the fabric and embroider different holding stitches for each level.

---

Convert bitmap objects to Cross-stitch designs

Import any bitmap design and get a flawless Cross-stitch design. Now any photo you have can be embroidered as a cross-stitch design.

---

More Styles and Patterns

353 Styles and 194 Patterns are included in the software. You can make combinations of those two and create unique embroidery designs.

---

Automatic overlapping shapes trimming

An automatic filter is added that removes the overlapped objects, where needed, and increases the embroidery quality. Also this filter can be handled manually and allows you to use your embroidering expertise.

---

Select between different fabrics

Select the fabric that you will embroider on and get the best possible embroidery result.

---

Automatic color matching with actual threads

Select the thread color palette that you will actually use and get the actual thread numbers/names that you have to use.

---

Save the designs in the most common embroidery file formats

Choose to save your designs in any of the following file formats: “.NGS, .dst, .dsz, .dsb, .sst, .ksm, .tap, .exp, .pec , .pes, .Hus, .Vip, .jef, .sew, .M3, .10O, .1??, .U??, .shv, .PCS” including PFAFF PCS and Barudan FDR

---

Adjust the Density of Satin, Step, Piping and Satin serial objects.

You can easily adjust the Density of objects that are filled with Satin, Step, Piping or Satin serial stitch type and produce lighter or heavier embroidery according you needs.

---

Adjust the Compensation of Satin, Step and Satin Serial objects.

By adjusting the Compensation of the objects you can handle better the powers that are applied on the fabric during the embroidering process.

---

Adjust the Length of stitches of Step, Piping and Running objects.

You can adjust the length of stitches and reduce/increase the stitch count of the embroidery. In addition you can give different feel on the design using your expertise.

Change the Underlay of Satin, Step and Satin Serial objects

You can select the underlay you want for each object, and stabilize the design in the way you prefer.

---

Specify the Applique Cleaning, Default Fixing and Position.

Make your life easier with appliqué designs and specify when the embroidery will be placed on the design (Cleaning), which will be the holding stitches (Default Fixing) and in which position the holding stitches will be placed (Position).

---

Export embroidery image

Users can now easily create a bitmap representation of the final stitch results which can be printed out for proofing, on garments, postcards, and used in various designs.

---

Keep sequence of overlapped objects

By default, the software simplifies the embroidery process by automatically stitching overlapped objects in the order they appear in the artwork.

Eliminates thread trims inside combined objects

The software now gives users the option to remove all thread trims between combined objects including text.

---

Select between 8 different embroidering strategies

Now you have the ability to select between 8 different embroidering strategies that are calculated automatically and embroider the objects on the fabric in the way you prefer. You can embroider you designs form Top to bottom, Bottom to top, Left to right, Right to Left, Small to large, Large to small, Inside to outside and Outside to inside. This tool is really important for embroidering hats which need to be embroidered from the center to right and left. Also, it is useful for delicate fabrics that need special care regarding the way that the objects will be placed on them.

---

Professional embroidery quality for everyone

The embroidering quality has been increased even more. The software includes Artificial Intelligence filters that produce better embroidery quality.

---

Offset control for Appliqué

When working with Appliqué, users can control the offset of the tack-down stitches.

---

Offset control for Running and Satin serial objects

Users can control the offset of running as well as Satin Serial to outlines/line art objects and borders.

---

Direction control in Satin, Step and Piping objects

You can change direction in Step objects to the preferred angle and give artistic feel with a shape pattern. In addition, you can add more directions to Satin/Ping objects and change the way that the object will be embroidered.

---

Divide Satin and Piping objects

Use the divide tool to create subsections in an object and change the way that the object will be embroidered. Especially in shapes that are filled with satin you can divide them and produce subsection filled with satin bars.

---

Import stitch file

Embroidery designs (including ngs, dsz, and pes) can now be imported and converted directly into a vector design. With this feature, users can import ready-made embroidery designs, convert them to vector designs, make desired changes, and then easily embroider them. Old designs can take life again!

---

“Scan To Embroidery” tool

New scan ability that allows you with only a few clicks to scan images and either convert them directly to embroidery or use them as backdrop to manually create the design on top.

---

built-in Auto Tracer with color adjustments

The software automatically recognizes the type of image (bitmap, vector) you are importing from the starting dialog and loads the Auto-tracer for every bitmap. Set the number of colors you want the embroidery design to have so as to still look close to the starting image and you are ready. Any change you make on the Auto-tracer is automatically previewed to help you improve the traced image on the fly

---

Import Stitch files as is and edit them with new editing tools

Import any supported stitch file inside the software as is, and selectively convert parts/objects of it or the entire embroidery design to editable Vector artwork. You can also leave it unchanged and simply add some text or a complete design directly in the new working area. Give life to your old designs and enhance your current ones. You will never find yourself again stuck with stitch files you cannot edit simply because you don’t have the source stitch file any more.

---

Combine stitch files with vector files

Now, you have the ability to have two or more stitch files together with your vector designs inside the working area. You can edit them, decorate them and produce a new embroidery design from the combination of various different designs. And all of these with a few clicks of the mouse.

---

Manually Create your designs from scratch directly in the working area with backdrop or not, with 2 different DRAW tools

Three fundamental drawing tools (Freehand, Digitize tool) are now available in the working area of DRAWings® which allow you to create designs from scratch or based on an imported backdrop. You can now draw the objects in 3D mode and view how the stitches are applied immediately. Any fine tune or change in the shape can be done directly in the DRAWings. Traditional digitizers can take advantage of this feature and produce exactly the embroidery results they want.

---

Complete designing tool set

A complete designing tool set is now available in the software to enable you to create your designs directly inside it. You can use existing shapes like Circles, Pies Trapeziums, Parallelograms, Stars, Polygons and Rectangles together with the existing transformation tools to create exactly the designs you want to embroider.

---

Complete Text tool set to Add text, Add text on path, Edit text and much more

You can now add Text and edit it by changing its Font type, Font size and Font style. You can even change its shape and size, place text on a path or on any shape you have created.

---

Complete editing/transformation abilities

Any transformation you need to do can be made directly in the software. You can Re-order, Move, Resize, Repeat your transformations, Delete or Add new objects and view the effect of your transformations.

---

Ability to Align, Distribute and Auto size objects

By using the mouse you can easily Resize, Skew, Rotate and Mirror any object or even entire designs.

---

Ability to Resize, Skew, Rotate and Mirror designs

Object Alignment abilities are available which allow you to make accurate adjustments to your design. You can also set objects to have equal distances between them by distributing them automatically on the working area. Additionally, you can make sides of objects or entire objects to have the same size with only a single click of the mouse.

---

Ability to Group, Ungroup, Combine and Break apart

Organize your objects by Grouping and Ungrouping them to make your designing work easier and more effective. You also have the ability to combine different objects and make them parts of a single object or vice versa, by Breaking Combined objects apart. By Combining Objects you can create holes and new shapes.

---

Ability to Intersect, Weld and Trim objects

Create any shape you can think of by Welding, Trimming or Intersecting objects with a single click of the mouse. These tools can also help you edit your designs by welding many smaller objects to one larger and remove unnecessary stitches under overlapping objects.

---

Color manager

You can now set/change colors and make any color adjustments you want. Define your own colors or use any one from the existing thread color palette.

---

3D vector/embroidery designing abilities

Draw your Vector/Embroidery designs directly in 3D mode. DRAWings PRO is one of the few 3D designing software in the world which incorporates the latest technology innovations.

Copy and Paste between other instances (new tabs) of the software

Duplicate the designs you are creating by Copying and Pasting them directly in other tabs of DRAWings. You can also use this ability to Paste designs from other designing software and convert them to stitches. Therefore any design from any software can become part of your design within DRAWings.

Complete Hoop designer including the most popular hoops of the market

A complete list of hoops is now included to help you confirm in advance whether the design you are creating can fit inside a certain hoop that you plan to use. You can also create and use custom hoops based on your machine’s accessories.

---

Use Guidelines, the Ruler and Grid for accurate shape transformations and new shape designing

Tools that will make you draw your designs easier are included in the software. You can add Guidelines or enable the Grid and the Ruler to help you draw new shapes or make accurate changes to your designs.

---

Many selection abilities for easier embroidery changes

Select by color, by stitch type and by overlapping order are only a few of the new selection abilities that have been added to help you make multiple changes on the embroidery design you are creating.

---

Use the New Symbol library and convert any symbol to perfect embroidery

Insert Symbols that will automatically and easily be converted to embroidery. All Symbols that come with your installed Fonts can be used as clipart and be added to your design through the Insert Symbol function.

---

Complete Node/Shape editor

A complete and powerful Node/Shape editor is included. With the Node editor you can easily reshape any object of your design and view how these changes affect the embroidery, instantly.

---

Embroidery quality enhancements together with a new fabric category

Embroidery quality has been even further enhanced and a new Fabric category has been added for smoother embroidery results.

---

3D realistic preview with editing abilities

A new 3D engine has been created to allow you to create entire embroidery designs directly in 3D mode.

---

Ability to export your artwork to vector file (svg file)

Any embroidery design that is created inside the software also consists of a vector design artwork that can be individually exported to SVG file format for future use. Therefore, you can separate your artwork from the embroidery design whenever you want.

---

The software makes use of the new Multi-core processors abilities.

Therefore it offers you faster calculation of the various parameters and almost instant regeneration of your designs.

---

Works as a complete stand-alone embroidery designing software.

The software includes a complete built-in designer and can effectively be used as a standalone application, as it includes everything you need to create and edit your embroidery designs. At the same time it allows you to continue working with your favorite graphics design software.

---

Intelligent auto-backup system

New auto-backup system re-loads the design you were working on if something goes wrong.

---

DRAWINGS X PRO “NEW” & CURRENT FEATURES LIST